![]() |
|
|
|||||||
| Home | Register | Groups | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read | Go to DV247.com | |
| New to Forums or just joined? Why not start your journey here? | ||||||||||
| Acoustic Treatment Optimise acoustics in your studio environment for accurate mixing - the best advice here.. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
Bit more work done on this today. You can see for the front wall trap I started by placing a piece of high density rockwool vertically in the framing. What you can't see here is the fact there is an inch wide gap running behind the board:
![]() You can see in this one how I'm placing 50mm general purpose rockwool vertically to fill out the trap (this is because the rockwool is allegedly more effective if the waves can enter and run with the grain of the material): ![]() ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
This one is of that rear cavity now pretty much full up:
![]() This one is the same thing from the front view: ![]() This one is a longer shot so you can see how it is starting to shape up (I shoved my desk into position so you can get an idea of how it will look): ![]() ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Super Member
Join Date: Aug 2008
Posts: 312
|
What are those, marijuana leaves on those walls...
![]() Frank ______________________________
Frank Oesterheld GIK Acoustics GIK Bradford Now Open! www.gikacoustics.com (+44) 020 7558 8976 (UK) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
It's all about the vibe man!
![]() Seriously though... am I missing anything here? Your thoughts always welcome! ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Super Member
Join Date: Aug 2008
Posts: 312
|
Not so far...I want to get a better idea where you're going with it. You'll have the 1/4 wavelength bump to deal with, so you'll need to do something on the front wall.
So far so good. I'm eagerly watching the thread, so I'll add commentary as you go for sure. Frank ______________________________
Frank Oesterheld GIK Acoustics GIK Bradford Now Open! www.gikacoustics.com (+44) 020 7558 8976 (UK) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
I spent today doing a bit more work putting the old control room back together. I'd got the builders to plaster the old window cavity late last week:
![]() Meaning I could get right on with the left hand superchunk: ![]() You can see the inch wide gap I left behind it in this shot: ![]() It all came together quite quickly though: ![]() ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Costa Del Cool
Join Date: Jul 2008
Location: Spain
Posts: 3,052
|
Trev, this is a real lesson in acoustic treatment. I love watching it develop but can I be so bold as to ask how much all this will probably cost by the time it's done...just so I can start budgeting!! If you prefer not to say publicaly, I could PM you the question.
______________________________
Eat my dust! I've made my move and there's no looking back! |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
Quote:
Probably about a hundred quid so far (maybe £120 but not far off). I figure on another hundred for the other half. I picked up a spotlight bar in Wickes for a tenner this pm on the way home. I've still got some fabric to buy to cover it (no idea on the price of this). Then a lick of paint and Robert's your mother's brother! ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
||
|
Super Member
Join Date: Aug 2008
Posts: 312
|
Yep...that's about what it takes to get a room like that fixed. Can't wait to see the finished product.
Frank ______________________________
Frank Oesterheld GIK Acoustics GIK Bradford Now Open! www.gikacoustics.com (+44) 020 7558 8976 (UK) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
Bit more work today on this. Started doing the wall/ceiling corner on the left hand wall. Am taking exactly the same approach to this as I did for the front where the wall/ceiling meet.
You can see here I'm putting up a frame: ![]() And then just filling it up with rockwool: ![]() ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
This week's handiwork.
First I got a trap up on the backwall: ![]() then I started the last vertical one: ![]() Nearly done: ![]() And...alleyoop: ![]() ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
So that's both vertical traps up on the backwall:
![]() Time to start on the ceiling/wall corner across the top of the backwall: ![]() And another: ![]() ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
Looking backwards and left from the front of the room:
![]() And looking backwards and right from the same position: ![]() And finally, so you don't forget, this one's looking forward to the mix position: ![]() ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
|
Mic Check 1!
Join Date: Aug 2008
Location: England
Posts: 2,094
|
I finally got around to finishing the sidewall/corner traps:
![]() And another shot: ![]() All i have to deal with now are that front/back standing wave and the mirror points. I've also gotta upholster the lot. Material arrived this week. I managed to get the same stuff cheaper elsewhere ______________________________
You can't polish a turd! (unless it's a jettsetty and urbane one!) |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Room treatment | JAYDMF | Pro Audio | 38 | 18th July 2009 08:07 PM |
| Getting audio signal from recording room to control room | tshepo | Pro Audio | 8 | 6th April 2009 11:03 AM |
| Can any room be effectively treated? | sureno | Acoustic Treatment | 37 | 2nd April 2009 10:51 PM |
| Room Measurement | kilo8017 | Pro Audio | 3 | 2nd February 2009 10:42 PM |
| Room Treatment Report from Frank (GIK) | FrankGIK | Acoustic Treatment | 15 | 23rd December 2008 05:37 PM |