Distorted saw wave+square wave an octave down maybe - 3 falling notes keys + occasional 4th low note (programmed, probably not an arp) and very heavily kicked pumped, and EQd a little to take the mid out. The hardest bit will be getting the compressor to respond right. Stsick your synth in mono mode and with a bit of release, maybe a little porto.
If using live's compressor, then need the threshold down below the lowest point of travel on the input meter. Ratio about 6-10 or so, release about 30-50, and knee around 4-6db.
Quite easy to repro
